1.
Plan and Prepare for Work: Prepare the work area and equipment for workplace operations for the day.
2.
Toolbox/Team Meeting: Actively participate in a team toolbox talk/meeting on the work site. Record notes of this meeting.
3.
Frame and Fit Wet Area: set out and erect timber framing for baths and shower bases.
4.
Fit Wet Area Sheets: Hanging and fixing wet area sheets in internal waterproofing areas.
5.
Prepare for Internal Waterproofing: Prepare and assess surface of internal bathrooms, incorporating niches, tap penetrations and water stops.
6.
Apply Waterproofing to Internal Areas: Apply waterproofing to internal bathrooms, incorporating niches, tap penetrations and water stops.
7.
Prepare for External Waterproofing: Prepare and assess surfaces for external decks areas, as well as planter boxes.
8.
Apply Waterproofing to External Areas: Apply waterproofing on surfaces of external decks areas, planter boxes and apply sealants.
9.
Apply Sealants and Sealant Devices Applying the following sealant materials: mastic, putty, silicone, waterproof paint membrane.
10.
Protective Paint Coatings: Apply both water-based and solvent-based protective coating systems to metal and masonry surfaces.
11.
Liquid Waterproofing System: Apply waterproofing to below ground areas using a liquid membrane system.
12.
Liquid Waterproofing System: Apply waterproofing to below ground areas using a sheet membrane system.
13.
Analysing Defects: Analysing defects such as cracks, rising damp, leaks and damaged waterproofing membrane.
14.
Repairing Defects: Repairing defects such as cracks, rising damp, leaks and damaged waterproofing membrane.
15.
Demolition project: Remove ceilings, walls, fixtures and fittings from a non-load bearing structure.
16.
How would you check the moisture levels in a substrate prior to membrane installation and what process would you engage?
17.
What is a bond breaker and what is its function?
18.
What is fillet and what is its function?
19.
When applying a liquid membrane, how would you ensure you have achieved the required wet film thickness?
20.
How would you check the location of the cavity damp course?
21.
You are asked to waterproof a balcony constructed from Particle Board.
22.
A membrane warranty is:
23.
On a cement rendered balcony, with a concrete floor there are obvious damp areas, what special precautions would you take before applying a polyurethane membrane system?
24.
When installing sheet membranes where would you commence laying?
25.
What type of coating is suitable for application below a planter box?